A tractor-trailer loses tire tread on I-10, then collides with another vehicle. The sequence raises several questions: Did the tire fail first? Did detached material strike the other vehicle? Did the truck change direction? Or did collision damage cause the tire to fail? The answer requires more than a photograph of rubber on the road.
The tire, wheel position, service history, load, and vehicle movements need to be examined together. Evidence may support an earlier maintenance problem, a manufacturing issue, fresh road damage, or another cause. Preserve it before deciding which explanation fits.
Identify the tire and preserve its surroundings
Start with the tractor and trailer identifiers, axle, and exact wheel position. A record for a drive tire does not establish the condition of a different tire on the trailer. Photograph identifying markings, tread, sidewalls, wheel, valve, and any adjacent tire, with wider views showing their positions on the vehicle.
Record where fragments were found and who collected them. Do not enter traffic or handle a damaged wheel assembly to gather evidence. Responders and qualified personnel can address recovery and safe handling. Once parts are recovered, document their storage and transfers so they can be connected to the truck involved.
Before repair, disposal, or testing changes the evidence, counsel and appropriate experts can arrange an inspection and a documented examination plan. Preserve the wheel assembly and surrounding components as well as the rubber. A failed tire viewed alone may leave important questions unanswered.
Match each record to a question
Scroll horizontally to see all columns. Use the arrow keys when the table is focused.
| Evidence | What to examine | What it may clarify |
|---|---|---|
| The tire, detached tread, fragments, and wheel assembly | Identity, damage, wear, prior repairs, and the condition of related components. | Whether the physical findings support a failure before impact or damage during the collision. |
| Installation and service records | Dates, mileage, tire identifiers, wheel positions, pressure entries, and work performed. | How long that tire had been used and whether a reported problem received attention. |
| Driver reports and communications | Complaints, warnings, repair certifications, road-service calls, and dispatch responses. | What was known before the trip and what happened after a concern was reported. |
| Load and trip documents | Scale tickets, cargo information, route, permits where relevant, and changes during the trip. | The load and operating conditions to compare with the tire’s rating and pressure requirements. |
| Scene photographs, video, and witness accounts | Debris locations, contact points, tire marks, vehicle paths, and the order of events. | How the failure, driver response, and collision relate to one another. |
| Tow, storage, and later repair records | Where the equipment went, who handled it, and which parts were removed or replaced. | Whether the inspected condition reflects the crash or later handling. |
A service entry saying “tires checked” deserves comparison with the shop’s underlying notes and the correct unit number. Conversely, a recent replacement invoice may explain why an older inspection describes a tire no longer mounted on the truck.
Check the applicable tire rule precisely
When the federal motor carrier rules apply, 49 C.F.R. § 393.75 prohibits operation with exposed ply or belt material, tread or sidewall separation, a flat or audible leak, or a cut exposing that material.
The minimum tread depth is 4/32 inch for a truck or truck tractor’s front tires and generally 2/32 inch for other tires. Measurements use major grooves and exclude tie bars, humps, and fillets. The rule also addresses loading, specified exceptions, and cold inflation pressure for the load carried.
Retreaded and regrooved tires are distinct categories under this rule. Its front-wheel ban on regrooved, recapped, or retreaded tires concerns buses. For trucks and truck tractors, paragraph (e) separately restricts front-wheel use of regrooved tires rated at least 4,920 pounds. A retread label alone does not establish the claimed truck violation.
Identify the relevant condition and when it existed. Post-collision damage alone does not show that a prohibited condition was present when the truck began the trip.
Read maintenance records alongside driver reports
Section 396.3 requires systematic inspection, repair, and maintenance of equipment under a covered carrier’s control. For vehicles controlled for 30 consecutive days, its records requirements include vehicle identity, maintenance scheduling, and the date and nature of work. The required records are retained for one year and for six months after the vehicle leaves the carrier’s control, subject to the rule’s scope.
Driver vehicle inspection reports raise a different question. Under the current section 396.11, a driver need not prepare a motor-carrier-equipment report when no defect was discovered or reported. The section also contains exceptions for certain operations, including a carrier operating only one commercial motor vehicle. An absent report therefore needs investigation before anyone calls it a violation.
Where a report identifies defects, examine the required corrective action and certification. The report and related certifications have a three-month retention period. Separately, section 396.13 requires the driver to be satisfied that the vehicle is safe before driving and addresses review of the previous report when required. Our truck maintenance and DVIR guide explains these record categories in more detail.
Preserve vendor records and test the collision sequence
The carrier’s file may not contain everything. Identify the owner, lessor, outside tire shop, road-service company, and tow or salvage yard. A targeted preservation request should identify the crash, tractor, trailer, tire position, relevant dates, physical parts, and associated paper and electronic records.
Routine retention periods are a reason to act promptly. They do not guarantee that video or every vendor record will remain available. A request should be followed by appropriate steps to confirm preservation and arrange access. The guide to documenting truck-crash evidence covers the wider investigation.
Finally, connect the findings to the collision. A defect that had no role in the crash presents a different issue from a failure that caused a loss of control or sent debris into another vehicle. Compare physical findings with the truck’s path, available recordings, driver actions, and other vehicles’ movements. Qualified analysis may be needed where the timing or mechanics remain disputed.
Our commercial vehicle accident practice can evaluate the equipment, record holders, and evidence of causation together. Useful starting information includes the truck identifiers, crash location, photographs, report number, and current storage location.
This article provides general information. The vehicle, operation, applicable rules, component condition, and collision evidence determine how a particular tire-failure claim should be evaluated.